Non Ferrous Extruders

AK100

Light duty steel strapping head.

AK101

Light duty steel strapping head for small pack faces

AK200

Heavy duty plastic strapping head

Angleboard

Angleboard® is made of multiple plies of recycled paper laminated together and formed into a rigid right angle to make the best cardboard corner edge protectors on the market.

Anglewrap

AngleWrap® is made of multiple plies of recycled paper, laminated together with glue and encased in a full outer wrap of paper. The board is then formed into a rigid right angle to ensure maximum edge protection.

APX Board

APXboard™ laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle. Ideal for unitization and edge protection.

Bulk Bags for Cut Parts

Used as an alternative to wooden crates, metal bins, etc. They hold smaller pieces of scrap parts.

BXT3-13 Battery Powered Hand Tool

Battery powered strapping hand tool specifically designed for use with 10 - 13mm plastic strapping.

BXT3-16 Battery Powered Hand Tool

Battery powered strapping hand tool specifically designed for use with 13 - 16mm plastic strapping.

BXT3-19 Battery Powered Hand Tool

Battery powered strapping hand tool specifically designed for use with 16 - 19mm plastic strapping.

Cornerboard™

Cornerboard edge protection is a high-strength, moisture-resistant corner protection post made of recycled paper and plastic with a paper outer wrap. The plastic corner leading edge protection content enables potential exposure to moisture for long periods of time without deteriorating. This makes ideal protection for products that are exposed to the elements and shipped on flat bed trucks, stored outdoors, or exposed to high humidity.

Edge Protection

Edge Protectors are made of multiple plies of recycled paper laminated together and formed into a rigid right angle. The Protectors are precisely cut to length for both hand and machine application. Edge Protectors improve tension transmission of strapping and afford product edge protection from strapping damage.

Edge Protector

Pre-formed, laminated paper Edge Protectors improve tension transmission of strapping and afford product edge protection from strapping damage.

EdgeMaster™

Edgemaster™, made of multiple plies of recycled paper is a lower cost alternative to traditional corner protection, helps unitize and reinforce your pallet load.

Flat Edge Protector

Shipped flat, laminated paper Edge Protectors form a 90 degree angle.  Used to  improve tension transmission of strapping and afford product edge protection from strapping damage.

Formaboard™

Super strong Formaboard™ edge protection is lightweight, and water/moisture resistant. Ideal for transporting refrigerated/frozen foods.

GatorSTRAP® woven polyester strapping and GatorLASH® woven polyester lashing

GatorSTRAP® woven polyester strapping and GatorLASH® woven polyester lashing for load securement in rail, truck and intermodal shipping. Buckles and tensioning tools.

Hand Wrap

Used to contain and protect loads in a wide range of segments and applications.

Homasote Spacers

Metal coil separator spacers.

Jumbo Corner™

Jumbo Corner edge protection are made of multiple plies of paper laminated together providing superior product protection during transport. Oversized Jumbo Corners are perfect for bulky, hard to unitize products.

Machine Grade Edge Protector

Precisely cut to be applied by a strapping machine, pre-formed, laminated paper Edge Protectors allow for high strapping tension protecting your pallet from strapping damage. 

Magnus®

Magnus is a cold-rolled, heat-treated steel strapping that provides high tensile strength and shock resistance for the heaviest-duty applications.

Mitered Angleboard®

Mitered Angleboard® is made of multiple plies of recycled paper, laminated together then formed into a rigid right angle. Notches allow the board to be easily folded in a 90 degree angle to protect the perimeter of a load.

Pallet Frame

Pallet Frame is a preformed, one-piece, laminated paperboard frame used for edge protection and unitization. Pallet Frame remains in place making it easy to apply stretch wrap or strapping.

Plastic Spacers

Used to separte slit coil/mults, sheets of metal, etc., so a fork truck can gets its forks under the protect and lift it. Plastic is used more frequently when the products being stacked are very heavy and require higher crush resistance.

Poly Coated Paper

Used for specialty packaging solutions with abrasion protection for products with various shapes and sizes.

Polyester Strap

May be an alternative to steel strapping. Used to help contain and protect loads.

Protective Masking

This specialty film is used to protect surfaces of metals and other finished products in order to reduce scratches to the surface and sometimes to reuce rusting and staining caused by the outside environment.

Qwik-Crate®

Qwik-Crate laminated paperboard shipping container provides superior beam strength and crush resistance for maximum product protection.

Reddi-Bend

Reddi-Bend is a laminated paperboard u-channel with a curvilinear design that easily wraps around curves and corners providing 3-sided edge protection for irregular shaped products.

Reddi-Crate®

Reddi-Crate laminated paperboard packaging helps prevent damage that can occur during shipping and handling.

Reddi-Flex U-Board

Reddi-Flex laminated packaging helps prevent product damage that can occur during shipping and handling. It stores and ships nested with preformed, solid corners.

Replastec

RePlastec is a combined rigid and flexible layered, plastic coil separator used to prevent damage to stacked metal coils.

SB Series

SB Series edge protection is a laminated paperboard made of multiple plies of recycled paper formed into a rigid right angle, with an innovative double-wrap that optimizes performance at a lower cost than traditional laminated products.

SCL

Manual Combination Tool for sealless steel strapping. The lightweight, ergonomical and durable mobile solution for universal applications.

Single Face

Manufactured from recycled corrugated paper, Single Face corrugated paper is an economical protective packaging material used for both cushioning and wrapping applications.

Skid Runner

Typically used in the metals industry to cover the pallet runners to create a barrier between the metal and the wood. This can help reduce rusting or staining.

Snap Sticks

Used to separte slit coil/mults, sheets of metal, etc., so a fork truck can gets its forks under the protect and lift it.

STB

Performance redefined with the STB battery powered tools for PP/PET straps in universal applications.

Steel Strap

Signode steel strap provides standard and high tensile quality, produced with different waxed finishes; blue-annealed, black-painted , zinc-painted

STM

Manual tool for sealless steel strapping. The lightweight ergonomic and durable mobile solution for universal applications.

STR 64/65/66

Pneumatic Tools for steel strapping with push type seals. Reliable high performance with adjustable tension.

Stretch Film Machine Grade

Use to contain and protect loads in a wide range of segments and applications.

Tenax®

Tenax polyester strapping (PET), designed for medium to heavy-duty palletizing and unitizing and can be applied by hand tools or strapping equipment.

TransMat Rubber Friction Mat

TransMat® Rubber Friction mat for load securement in rail, truck and intermodal. Prevents product movement and load-shift during transit.

U-Board

U-Board laminated paper packaging is made of multiple plies of paper laminated together and formed into a rigid U channel. Used for 3 sided edge protection, U-Board protects products from damage that can happen during transit.

Wood Spacers

Used to separte slit coil/mults, sheets of metal, etc., so a fork truck can gets its forks under the protect and lift it.

Z32

Modular strapping head for plastic strapping is designed to accommodate faster production speeds, while reducing maintenance time and costs.