Protective

Hand Wrap

Used to contain and protect loads in a wide range of segments and applications.

PE FILM

PE Films and PE VCI Films are multitasking products for many kinds of applications like lumber steel and automotive industry.

Stretch Film Machine Grade

Use to contain and protect loads in a wide range of segments and applications.

Angleboard

Angleboard® is made of multiple plies of recycled paper laminated together and formed into a rigid right angle to make the best cardboard corner edge protectors on the market.

Anglewrap

AngleWrap® is made of multiple plies of recycled paper, laminated together with glue and encased in a full outer wrap of paper. The board is then formed into a rigid right angle to ensure maximum edge protection.

APX Board

APXboard™ laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle. Ideal for unitization and edge protection.

Brick-Edge

Brick/Block Polyethylene Edge Protection enhances load stability and improves brick alignment. Designed to withstand outdoor weather conditions during storage and shipping.

Cornerboard

Cornerboard is a high-strength, moisture-resistant corner protection post made of recycled paper and plastic with a paper outer wrap. The plastic corner leading edge protection content enables potential exposure to moisture for long periods of time without deteriorating. This makes ideal protection for products that are exposed to the elements and shipped on flat bed trucks, stored outdoors, or exposed to high humidity.

Edge Protector

Pre-formed, laminated paper Edge Protectors improve tension transmission of strapping and afford product edge protection from strapping damage.

Flat Edge Protector

Shipped flat, laminated paper Edge Protectors form a 90 degree angle.  Used to  improve tension transmission of strapping and afford product edge protection from strapping damage.

Formaboard™

Super strong Formaboard™  pallet corner guards are lightweight, and water/moisture resistant. Ideal for transporting refrigerated/frozen foods.

Paper Pallets

Paper Pallets are 100% recyclable, lightweight, durable and made from honeycomb and corrugated material to handle heavy load volume. 

PolyAg

Made from 100% recycled HDPE, PolyAg corner posts are ideal for wet and humid applications such as agriculture.

SB Series

SB Series laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle, with an innovative double-wrap that optimizes performance at a lower cost than traditional laminated products.

Tier Sheets / Plastic Separator Sheets / Layer Sheets

Tier Sheets are clean, washable, and 100% solid polypropylene. They offer maximum load stability, reduced contamination, and greater product protection between layers of a variety of products.

All Poly Woven

Typically used in the metals industry for covering and protecting metals coils and sheets

Angleboard

Angleboard® is made of multiple plies of recycled paper laminated together and formed into a rigid right angle to make the best cardboard corner edge protectors on the market.

Anglewrap

AngleWrap® is made of multiple plies of recycled paper, laminated together with glue and encased in a full outer wrap of paper. The board is then formed into a rigid right angle to ensure maximum edge protection.

APX Board

APXboard™ laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle. Ideal for unitization and edge protection.

Brick-Edge

Brick/Block Polyethylene Edge Protection enhances load stability and improves brick alignment. Designed to withstand outdoor weather conditions during storage and shipping.

Cornerboard

Cornerboard is a high-strength, moisture-resistant corner protection post made of recycled paper and plastic with a paper outer wrap. The plastic corner leading edge protection content enables potential exposure to moisture for long periods of time without deteriorating. This makes ideal protection for products that are exposed to the elements and shipped on flat bed trucks, stored outdoors, or exposed to high humidity.

Die Cut Woven

Can be used to wrap and cover various types of products and to create customized packaging solutions in the metals indusrty.

Edge Guard

EdgeGuard is the prefect solution for products requiring light edge protection.

Edge Protector

Pre-formed, laminated paper Edge Protectors improve tension transmission of strapping and afford product edge protection from strapping damage.

Flat Edge Protector

Shipped flat, laminated paper Edge Protectors form a 90 degree angle.  Used to  improve tension transmission of strapping and afford product edge protection from strapping damage.

Formaboard™

Super strong Formaboard™  pallet corner guards are lightweight, and water/moisture resistant. Ideal for transporting refrigerated/frozen foods.

Machine Grade Edge Protector

Precisely cut to be applied by a strapping machine, pre-formed, laminated paper Edge Protectors allow for high strapping tension protecting your pallet from strapping damage. 

Mitered Angleboard®

Mitered Angleboard® is made of multiple plies of recycled paper, laminated together then formed into a rigid right angle. Notches allow the board to be easily folded in a 90 degree angle to protect the perimeter of a load.

Pallet Frame

Pallet Frame is a preformed, one-piece, laminated paperboard frame used for edge protection and utitization. Pallet Frame remains in place making it easy to apply stretch wrap or strapping.

Perforated Angleboard

Perforated Angleboard is made of multiple plies of recycled paper laminated together, formed into a rigid right angle, and perforated to simply snap apart by hand to the ideal length. 

Plastic Spacers

Used to separte slit coil/mults, sheets of metal, etc., so a fork truck can gets its forks under the protect and lift it. Plastic is used more frequently when the products being stacked are very heavy and require higher crush resistance.

Poly Coated Paper

Used for specialty packaging solutions with abrasion protection for products with various shapes and sizes.

PolyAg

Made from 100% recycled HDPE, PolyAg corner posts are ideal for wet and humid applications such as agriculture.

SB Series

SB Series laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle, with an innovative double-wrap that optimizes performance at a lower cost than traditional laminated products.

Skid Runner

Typically used in the metals industry to cover the pallet runners to create a barrier between the metal and the wood. This can help reduce rusting or staining.

Top Frames

Used on the top layer of tier-stacked goods PTC Top Frames create a rigid interlocking framework to unitize and secure

Angleboard

Angleboard® is made of multiple plies of recycled paper laminated together and formed into a rigid right angle to make the best cardboard corner edge protectors on the market.

Anglewrap

AngleWrap® is made of multiple plies of recycled paper, laminated together with glue and encased in a full outer wrap of paper. The board is then formed into a rigid right angle to ensure maximum edge protection.

APX Board

APXboard™ laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle. Ideal for unitization and edge protection.

Brick-Edge

Brick/Block Polyethylene Edge Protection enhances load stability and improves brick alignment. Designed to withstand outdoor weather conditions during storage and shipping.

Cornerboard

Cornerboard is a high-strength, moisture-resistant corner protection post made of recycled paper and plastic with a paper outer wrap. The plastic corner leading edge protection content enables potential exposure to moisture for long periods of time without deteriorating. This makes ideal protection for products that are exposed to the elements and shipped on flat bed trucks, stored outdoors, or exposed to high humidity.

Edge Guard

EdgeGuard is the prefect solution for products requiring light edge protection.

Edge Protector

Pre-formed, laminated paper Edge Protectors improve tension transmission of strapping and afford product edge protection from strapping damage.

Flat Edge Protector

Shipped flat, laminated paper Edge Protectors form a 90 degree angle.  Used to  improve tension transmission of strapping and afford product edge protection from strapping damage.

Formaboard™

Super strong Formaboard™  pallet corner guards are lightweight, and water/moisture resistant. Ideal for transporting refrigerated/frozen foods.

GatorSTRAP® and GatorLASH® woven cord strap

GatorSTRAP® and GatorLASH® heavy-duty polyester woven cord strap for load securement in rail, truck and intermodal shipping. Buckles and Tensioning Tools.

GATORSTRAP® and GATORLASH® are trademarks of Carolina Strapping and Buckles Company.

Mitered Angleboard®

Mitered Angleboard® is made of multiple plies of recycled paper, laminated together then formed into a rigid right angle. Notches allow the board to be easily folded in a 90 degree angle to protect the perimeter of a load.

Pallet Frame

Pallet Frame is a preformed, one-piece, laminated paperboard frame used for edge protection and utitization. Pallet Frame remains in place making it easy to apply stretch wrap or strapping.

Perforated Angleboard

Perforated Angleboard is made of multiple plies of recycled paper laminated together, formed into a rigid right angle, and perforated to simply snap apart by hand to the ideal length. 

PolyAg

Made from 100% recycled HDPE, PolyAg corner posts are ideal for wet and humid applications such as agriculture.

SB Series

SB Series laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle, with an innovative double-wrap that optimizes performance at a lower cost than traditional laminated products.

Tier Sheets / Plastic Separator Sheets / Layer Sheets

Tier Sheets are clean, washable, and 100% solid polypropylene. They offer maximum load stability, reduced contamination, and greater product protection between layers of a variety of products.

Top Frames

Used on the top layer of tier-stacked goods PTC Top Frames create a rigid interlocking framework to unitize and secure

TransMat Rubber Friction Mat

TransMat® Rubber Friction mat for load securement in rail, truck and intermodal. Prevents product movement and load-shift during transit.

Angle Pads

Angle Pads are pre-formed build up pads that provide edge protection and crush resistence.

Angleboard

Angleboard® is made of multiple plies of recycled paper laminated together and formed into a rigid right angle to make the best cardboard corner edge protectors on the market.

Anglewrap

AngleWrap® is made of multiple plies of recycled paper, laminated together with glue and encased in a full outer wrap of paper. The board is then formed into a rigid right angle to ensure maximum edge protection.

APX Board

APXboard™ laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle. Ideal for unitization and edge protection.

Edge Guard

EdgeGuard is the prefect solution for products requiring light edge protection.

Edge Protector

Pre-formed, laminated paper Edge Protectors improve tension transmission of strapping and afford product edge protection from strapping damage.

EdgeMaster™

Edgemaster™, made of multiple plies of recycled paper is a lower cost alternative to traditional corner protection, helps unitize and reinforce your pallet load.

Flat Edge Protector

Shipped flat, laminated paper Edge Protectors form a 90 degree angle.  Used to  improve tension transmission of strapping and afford product edge protection from strapping damage.

Machine Grade Edge Protector

Precisely cut to be applied by a strapping machine, pre-formed, laminated paper Edge Protectors allow for high strapping tension protecting your pallet from strapping damage. 

Pallet Frame

Pallet Frame is a preformed, one-piece, laminated paperboard frame used for edge protection and utitization. Pallet Frame remains in place making it easy to apply stretch wrap or strapping.

Angle Pads

Angle Pads are pre-formed build up pads that provide edge protection and crush resistence.

Angleboard

Angleboard® is made of multiple plies of recycled paper laminated together and formed into a rigid right angle to make the best cardboard corner edge protectors on the market.

Anglewrap

AngleWrap® is made of multiple plies of recycled paper, laminated together with glue and encased in a full outer wrap of paper. The board is then formed into a rigid right angle to ensure maximum edge protection.

APX Board

APXboard™ laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle. Ideal for unitization and edge protection.

Cornerboard

Cornerboard is a high-strength, moisture-resistant corner protection post made of recycled paper and plastic with a paper outer wrap. The plastic corner leading edge protection content enables potential exposure to moisture for long periods of time without deteriorating. This makes ideal protection for products that are exposed to the elements and shipped on flat bed trucks, stored outdoors, or exposed to high humidity.

Formaboard™

Super strong Formaboard™  pallet corner guards are lightweight, and water/moisture resistant. Ideal for transporting refrigerated/frozen foods.

PolyAg

Made from 100% recycled HDPE, PolyAg corner posts are ideal for wet and humid applications such as agriculture.

SB Series

SB Series laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle, with an innovative double-wrap that optimizes performance at a lower cost than traditional laminated products.

Angle Pads

Angle Pads are pre-formed build up pads that provide edge protection and crush resistence.

Angleboard

Angleboard® is made of multiple plies of recycled paper laminated together and formed into a rigid right angle to make the best cardboard corner edge protectors on the market.

Anglewrap

AngleWrap® is made of multiple plies of recycled paper, laminated together with glue and encased in a full outer wrap of paper. The board is then formed into a rigid right angle to ensure maximum edge protection.

APX Board

APXboard™ laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle. Ideal for unitization and edge protection.

Brick-Edge

Brick/Block Polyethylene Edge Protection enhances load stability and improves brick alignment. Designed to withstand outdoor weather conditions during storage and shipping.

Cornerboard

Cornerboard is a high-strength, moisture-resistant corner protection post made of recycled paper and plastic with a paper outer wrap. The plastic corner leading edge protection content enables potential exposure to moisture for long periods of time without deteriorating. This makes ideal protection for products that are exposed to the elements and shipped on flat bed trucks, stored outdoors, or exposed to high humidity.

Edge Guard

EdgeGuard is the prefect solution for products requiring light edge protection.

Edge Protector

Pre-formed, laminated paper Edge Protectors improve tension transmission of strapping and afford product edge protection from strapping damage.

Flat Edge Protector

Shipped flat, laminated paper Edge Protectors form a 90 degree angle.  Used to  improve tension transmission of strapping and afford product edge protection from strapping damage.

Formaboard™

Super strong Formaboard™  pallet corner guards are lightweight, and water/moisture resistant. Ideal for transporting refrigerated/frozen foods.

Machine Grade Edge Protector

Precisely cut to be applied by a strapping machine, pre-formed, laminated paper Edge Protectors allow for high strapping tension protecting your pallet from strapping damage. 

Mitered Angleboard®

Mitered Angleboard® is made of multiple plies of recycled paper, laminated together then formed into a rigid right angle. Notches allow the board to be easily folded in a 90 degree angle to protect the perimeter of a load.

Perforated Angleboard

Perforated Angleboard is made of multiple plies of recycled paper laminated together, formed into a rigid right angle, and perforated to simply snap apart by hand to the ideal length. 

PolyAg

Made from 100% recycled HDPE, PolyAg corner posts are ideal for wet and humid applications such as agriculture.

SB Series

SB Series laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle, with an innovative double-wrap that optimizes performance at a lower cost than traditional laminated products.

Angleboard

Angleboard® is made of multiple plies of recycled paper laminated together and formed into a rigid right angle to make the best cardboard corner edge protectors on the market.

Mitered Angleboard®

Mitered Angleboard® is made of multiple plies of recycled paper, laminated together then formed into a rigid right angle. Notches allow the board to be easily folded in a 90 degree angle to protect the perimeter of a load.

Pallet Frame

Pallet Frame is a preformed, one-piece, laminated paperboard frame used for edge protection and utitization. Pallet Frame remains in place making it easy to apply stretch wrap or strapping.

Paper Pallets

Paper Pallets are 100% recyclable, lightweight, durable and made from honeycomb and corrugated material to handle heavy load volume. 

Top Frames

Used on the top layer of tier-stacked goods PTC Top Frames create a rigid interlocking framework to unitize and secure

Die Cut Woven

Can be used to wrap and cover various types of products and to create customized packaging solutions in the metals indusrty.

Edge Protection

Edge Protectors are made of multiple plies of recycled paper laminated together and formed into a rigid right angle. The Protectors are precisely cut to length for both hand and machine application. Edge Protectors improve tension transmission of strapping and afford product edge protection from strapping damage.

Extruded Sheets

Plastic Packaging manufactures custom, heavy duty, hard plastic sheets for a variety of markets and industries. 

Poly Coated Paper

Used for specialty packaging solutions with abrasion protection for products with various shapes and sizes.

Tier Sheets / Plastic Separator Sheets / Layer Sheets

Tier Sheets are clean, washable, and 100% solid polypropylene. They offer maximum load stability, reduced contamination, and greater product protection between layers of a variety of products.

Poly Coated Paper

Used for specialty packaging solutions with abrasion protection for products with various shapes and sizes.

Slip Sheets

Reusable and recyclable, plastic slip sheets offer a durable, space saving, transport packaging solution. An excellent alternative to wood pallets.

Tier Sheets / Plastic Separator Sheets / Layer Sheets

Tier Sheets are clean, washable, and 100% solid polypropylene. They offer maximum load stability, reduced contamination, and greater product protection between layers of a variety of products.

U-500

This is a specialty adhesive applicator for all LOCK N' POP products that has capability for pattern control and flow sensing as well as upgraded PLC for other potential requirements.

U-85

This is a standard applicator designed for application of all LOCK N'POP adhesive products.

All Poly Woven

Typically used in the metals industry for covering and protecting metals coils and sheets

Die Cut Woven

Can be used to wrap and cover various types of products and to create customized packaging solutions in the metals indusrty.

Poly Coated Paper

Used for specialty packaging solutions with abrasion protection for products with various shapes and sizes.

All Poly Woven

Typically used in the metals industry for covering and protecting metals coils and sheets

Die Cut Woven

Can be used to wrap and cover various types of products and to create customized packaging solutions in the metals indusrty.

Poly Coated Paper

Used for specialty packaging solutions with abrasion protection for products with various shapes and sizes.

Angle Pads

Angle Pads are pre-formed build up pads that provide edge protection and crush resistence.

Angleboard

Angleboard® is made of multiple plies of recycled paper laminated together and formed into a rigid right angle to make the best cardboard corner edge protectors on the market.

Anglewrap

AngleWrap® is made of multiple plies of recycled paper, laminated together with glue and encased in a full outer wrap of paper. The board is then formed into a rigid right angle to ensure maximum edge protection.

Cornerboard

Cornerboard is a high-strength, moisture-resistant corner protection post made of recycled paper and plastic with a paper outer wrap. The plastic corner leading edge protection content enables potential exposure to moisture for long periods of time without deteriorating. This makes ideal protection for products that are exposed to the elements and shipped on flat bed trucks, stored outdoors, or exposed to high humidity.

Edge Protection

Edge Protectors are made of multiple plies of recycled paper laminated together and formed into a rigid right angle. The Protectors are precisely cut to length for both hand and machine application. Edge Protectors improve tension transmission of strapping and afford product edge protection from strapping damage.

Edge Protector

Pre-formed, laminated paper Edge Protectors improve tension transmission of strapping and afford product edge protection from strapping damage.

EdgeMaster™

Edgemaster™, made of multiple plies of recycled paper is a lower cost alternative to traditional corner protection, helps unitize and reinforce your pallet load.

Flat Edge Protector

Shipped flat, laminated paper Edge Protectors form a 90 degree angle.  Used to  improve tension transmission of strapping and afford product edge protection from strapping damage.

Machine Grade Edge Protector

Precisely cut to be applied by a strapping machine, pre-formed, laminated paper Edge Protectors allow for high strapping tension protecting your pallet from strapping damage. 

Pallet Frame

Pallet Frame is a preformed, one-piece, laminated paperboard frame used for edge protection and utitization. Pallet Frame remains in place making it easy to apply stretch wrap or strapping.

Paper Pallets

Paper Pallets are 100% recyclable, lightweight, durable and made from honeycomb and corrugated material to handle heavy load volume. 

Perforated Angleboard

Perforated Angleboard is made of multiple plies of recycled paper laminated together, formed into a rigid right angle, and perforated to simply snap apart by hand to the ideal length. 

SB Series

SB Series laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle, with an innovative double-wrap that optimizes performance at a lower cost than traditional laminated products.

Angleboard

Angleboard® is made of multiple plies of recycled paper laminated together and formed into a rigid right angle to make the best cardboard corner edge protectors on the market.

Anglewrap

AngleWrap® is made of multiple plies of recycled paper, laminated together with glue and encased in a full outer wrap of paper. The board is then formed into a rigid right angle to ensure maximum edge protection.

Cornerboard

Cornerboard is a high-strength, moisture-resistant corner protection post made of recycled paper and plastic with a paper outer wrap. The plastic corner leading edge protection content enables potential exposure to moisture for long periods of time without deteriorating. This makes ideal protection for products that are exposed to the elements and shipped on flat bed trucks, stored outdoors, or exposed to high humidity.

Edge Protector

Pre-formed, laminated paper Edge Protectors improve tension transmission of strapping and afford product edge protection from strapping damage.

Flat Edge Protector

Shipped flat, laminated paper Edge Protectors form a 90 degree angle.  Used to  improve tension transmission of strapping and afford product edge protection from strapping damage.

Formaboard™

Super strong Formaboard™  pallet corner guards are lightweight, and water/moisture resistant. Ideal for transporting refrigerated/frozen foods.

Mitered Angleboard®

Mitered Angleboard® is made of multiple plies of recycled paper, laminated together then formed into a rigid right angle. Notches allow the board to be easily folded in a 90 degree angle to protect the perimeter of a load.

GatorSTRAP® and GatorLASH® woven cord strap

GatorSTRAP® and GatorLASH® heavy-duty polyester woven cord strap for load securement in rail, truck and intermodal shipping. Buckles and Tensioning Tools.

GATORSTRAP® and GATORLASH® are trademarks of Carolina Strapping and Buckles Company.

LOCK N' POP®

Water based cohesive available in a varieity of formulations chosen based on packaging surface characteristics

TransMat Rubber Friction Mat

TransMat® Rubber Friction mat for load securement in rail, truck and intermodal. Prevents product movement and load-shift during transit.