Built in Programs
Up to 5000 bundle recipes built into the SMB INO inline strapping machine
Collect and gain production data via Ethernet/USB to support future production line enhancements
Due to the lateral strapper principle in the inline strapper and door-less concept design, the machine is easy to access and operate
Varied Strap Widths
Can use polypropylene strap with a width of 5 to 9mm
SMB INO 4.0
The inline strapper with the availability of a square strapper, SMB INO 4.0 has up to 5000 bundle recipes and is designed with up time in mind. Functions such as strap end detection, strap coil detection and an exclusive eject function to avoid strap jams are all part of the SMB INO 4.0. The machine has upstream and downstream interlocks with a complete plug connection.
Features and Benefits
- Wear Free
Energy saving direct drive motors, a wear free strap frame built from stainless steel alongside the easy to service build make the SMB INO 4.0 have high uptime.
- Automatic Strap Functions
Automatic strap threading, automatic strap tensioning as well as a strap coil detection with a yellow lamp. As well as an adjustable conveyor system.
- ICS Intelligent Compression System
Intelligent Compression System - the parameters for this are set via sophisticated sensors or recipe information from the higher-level control system. The modules have a high performance for short cycle times being economical as electric use is based on GreenTech.
- High Speed Kit
- Bundle Stops
- Bundle Press
|SMB INO 4.0
|Single Strap Bundles per minute
|32 or an optional 36 model
|Bundle width and height range (mm)
|Width: 150 - 420
Height: 10 - 400
|Strap Tension (N)
|Up to 325
|PP (Polypropylene DIN EN 13 394)
|Wide Range Input 380-520V, 3AC; 47 63 Hz
|Temperature range in °C [°F]
|5 - 45