Other

Angleboard

Angleboard® is made of multiple plies of recycled paper laminated together and formed into a rigid right angle to make the best cardboard corner edge protectors on the market.

Anglewrap

AngleWrap® is made of multiple plies of recycled paper, laminated together with glue and encased in a full outer wrap of paper. The board is then formed into a rigid right angle to ensure maximum edge protection.

APX Board

APXboard™ laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle. Ideal for unitization and edge protection.

Autoflator

Shippers' Autoflator allows users to set inflation pressure and automatically inflate Heavyweight airbags - improving safety, productivity and accuracy.

Avistrap Bundling Strap

Avistrap™ woven and composite polyester strapping for bundling and securement of lighter duty loads. Buckles and Tensioning Tools.

Big Foot Airbag

Shippers Products Big Foot Lightweight Vinyl Dunnage Airbags secure loads, fill voids and prevent damage during transport.

Brick-Edge

Brick/Block Polyethylene Edge Protection enhances load stability and improves brick alignment. Designed to withstand outdoor weather conditions during storage and shipping.

BXT3-13 Battery Powered Hand Tool

Battery powered strapping hand tool specifically designed for use with 10 - 13mm plastic strapping.

BXT3-16 Battery Powered Hand Tool

Battery powered strapping hand tool specifically designed for use with 13 - 16mm plastic strapping.

BXT3-19 Battery Powered Hand Tool

Battery powered strapping hand tool specifically designed for use with 16 - 19mm plastic strapping.

CF-25

Automatic uniform case erector that forms and bottom-seals corrugated cases at speeds up to 15 cases per minute.

CF-25SB

Narrow box Industrial grade case erector that forms and bottom-seals corrugated cases at speeds up to 15 cases per minute.

CF-5

Semi-automatic case erector capable of handling a variety of case sizes.

CF-50T

Automatic uniform case erector designed to fold a variety of corrugated cases at speeds of up to 20 cases per minute.

CF-5AF

An economical semi-automatic case former with an ergonomic design & accommodates a wide range of boxes.

Coil Edge Protectors (Plastic)

Polyethylene edge protection for paper and steel coils, Coil Edge Protectors contor to the circumference of the coil protecting edges from strap damage.

Cornerboard

Cornerboard is a high-strength, moisture-resistant corner protection post made of recycled paper and plastic with a paper outer wrap. The plastic corner leading edge protection content enables potential exposure to moisture for long periods of time without deteriorating. This makes ideal protection for products that are exposed to the elements and shipped on flat bed trucks, stored outdoors, or exposed to high humidity.

Digital Inflator

Shippers Products Digital Inflator allows users to precisely and quickly inflate airbags using the TX valve and sleeve venturi system.

Dylastic

Signode Dylastic® polypropylene strapping (PP-Strap) runs through hand tools and equipment with superior performance for light to medium-duty bundling

Edge Guard

EdgeGuard is the prefect solution for products requiring light edge protection.

Edge Protector

Pre-formed, laminated paper Edge Protectors improve tension transmission of strapping and afford product edge protection from strapping damage.

EdgeMaster™

Edgemaster™, made of multiple plies of recycled paper is a lower cost alternative to traditional corner protection, helps unitize and reinforce your pallet load.

Extruded Sheets

Plastic Packaging manufactures custom, heavy duty, hard plastic sheets for a variety of markets and industries. 

Fast Fill Inflator

Reliable and trustworthy, the Shippers Products Fastfill Valve allows user to quickly fill dunnage bags with low profile tips for tight voids.

Flat Edge Protector

Shipped flat, laminated paper Edge Protectors form a 90 degree angle.  Used to  improve tension transmission of strapping and afford product edge protection from strapping damage.

Flex PE Airbags

Shippers Products Flex Polyethylene Lightweight Dunnage Airbags secure loads and prevent damage in transit applications.

Forklift Inflator

Shippers Products unique Forklift Inflator allows users to quickly inflate bags using forklift battery power, improving productivity and efficiency.

Formaboard™

Super strong Formaboard™  pallet corner guards are lightweight, and water/moisture resistant. Ideal for transporting refrigerated/frozen foods.

GatorSTRAP® and GatorLASH® woven cord strap

GatorSTRAP® and GatorLASH® heavy-duty polyester woven cord strap for load securement in rail, truck and intermodal shipping. Buckles and Tensioning Tools.

GATORSTRAP® and GATORLASH® are trademarks of Carolina Strapping and Buckles Company.

G-Force™ Dunnage Products

G-Force™ Dunnage Products – G-Force dunnage products are designed to protect products during shipment via truck and rail.

Handle-U-Board

Handle U-Board provides superior 3-sided edge protection to prevent damage to edges.  Built-in handles create an effective way to move products from one location to another.

Heavyweight Gorilla Airbags

Shippers Products Gorilla Polywoven Dunnage Airbags can brace the heaviest of loads, traveling by rail, up to 205,000lbs. (AAR Levels 2-5)

Heavyweight Zebra Airbags

Shippers Products Zebra Heavyweight Kraft Dunnage Airbags can brace the heaviest of loads, traveling by rail, up to 205,000lbs (AAR Levels 2-4).

Hippo Airbags

With its square shape, Shippers Products HIPPO Lightweight Polywoven Dunnage Airbags are designed to brace loads with voids greater than 12 inches.

Honeycomb Panels

G-Force corrugated honeycomb panel for filling lengthwise or lateral voids and pallet under-hang during transit. Often used in conjunction with airbags.

Insta-Air Inflator

Shippers Products Insta-air provides unsurpassed air pressure in a battery inflator, improving safety, effiiceincy, and lower maintenance costs.

LD-16A

Fully automatic uniform top and bottom case sealer ideal for applications involving large runs of boxes.

LD-16AE

Fully automatic random case sealer ideal for customers who often change box sizes.

LD-16AR

Fully-automatic random case sealer processes a range of case sizes at speeds up to 20 cases per minute

LD-19SB

A side belt-driven semi-automatic case sealer designed to process low profile and/or narrow case sizes.

LD-24

Fully Automatic Uniform case sealer ideal for customers with high volume uniform box sealing demands.

LD-3SB

Ideal for dimensionally unstable, lightweight or narrow cases. This side belt driven tape sealer can seal cases as narrow as 3-1/4 inches.

LD-7

This top & bottom taper is an economical solution for large runs of uniform cases or uses with a small footprint & infrequent case size changes. 

LDLA-500 V2

Wipe-on apply only labeler for top or side of pallet case or primary product labeling applications

LD-X

The LD-X combines versatility and ease-of-maintenance for operational productivity, with quick-release drive belts for tool-less changeover.

LDX-RTB 4.0

Random, semi-automatic case sealer processes void-filled and over-stuffed cases.

LD-Xss RTE

Designed for food processing operations with a non-tubular, stainless steel design that can be easily sanitized to eliminate food borne pathogens. 

LDX-UTB

This fully welded, tubular steel, top and bottom drive case sealer is ideal for large runs of the same size cases, at high speeds. 

Legend R

Sing mast semi-automatic case sealer for sealing random box sizes at speeds of up to 80 feet per minute.

Legend U

Semi-automatic top and bottom case sealer for sealing uniform cases from 2.62" to 34" in height.

Lightweight Gorilla Airbags

Shippers Products Gorilla Polywoven Lightweight Dunnage Airbags secure loads and prevent damage in Over-the-Road and Intermodal applications. 

Lightweight Zebra Airbags

Shippers Products Zebra Paper Lightweight Dunnage Airbags secure loads and prevent damage in Over-the-Road and Intermodal applications. 

LX-600T/DT

Apply only labelers using preprinted labels onto either uniform or random cases.  For single tamp, dual tamp and corner wrap applications.

LX-800T

For print and apply applications this easy to use labeler is ideal for 24/7 operations.

M Frame and Bulkhead Space Fillers

G-Force lightweight corrugated space fillers to fill large voids and improve weight distribution in trucks and trailers.

MicroJet HRP

Available in one inch or 2 inch the MicroJet HRP is a durable and compact cartridge based jet printer.

MicroJet InkJet

Depending on your needs Loveshaw offers a wide variety of low cost large character inkjet coding printers.

Mitered Angleboard®

Mitered Angleboard® is made of multiple plies of recycled paper, laminated together then formed into a rigid right angle. Notches allow the board to be easily folded in a 90 degree angle to protect the perimeter of a load.

Monster Airbags

Designed specifically for the bulk shipping industry, Shippers Products Monster Polywoven bags are reusable and strong, yet lighter than rubber bags.

Pallet Frame

Pallet Frame is a preformed, one-piece, laminated paperboard frame used for edge protection and utitization. Pallet Frame remains in place making it easy to apply stretch wrap or strapping.

PET

Signode polyester strapping (PET-Strap) secures transport of palletised goods of all kinds, available in a big variety of dimensions

PolyAg

Made from 100% recycled HDPE, PolyAg corner posts are ideal for wet and humid applications such as agriculture.

PP

Signode polypropylene strapping (PP-Strap), designed for light packaged goods, available in multiple widths, thicknesses and strengths

Qwik-Crate®

Qwik-Crate laminated paperboard shipping container provides superior beam strength and crush resistance for maximum product protection.

Reddi-Crate

Reddi-Crate laminated paperboard shipping container helps prevent damage that can occur during shipping and handling.

SB Series

SB Series laminated paperboard is made of multiple plies of recycled paper formed into a rigid right angle, with an innovative double-wrap that optimizes performance at a lower cost than traditional laminated products.

SBM

High Performance Strapping Machines OR-M for demanding applications with embossed PP strap. Reliable fast user friendly.

SCL

Manual Combination Tool for sealless steel strapping. The lightweight, ergonomical and durable mobile solution for universal applications.

Slip Sheets

Reusable and recyclable, plastic slip sheets offer a durable, space saving, transport packaging solution. An excellent alternative to wood pallets.

SMB Vero 4.0

The economical, robust, fully automatic strapping machine.

SP-304

Semi-automatic case sealer with and an extended drive. Reduces repetitive motion and increases productivity.

SP-304 BO (bottom only)

Semi-automatic uniform case erector which bottom seals cases at speeds of up to 24 cases per minute.

SP-304R BO (random - bottom only)

Semi-automatic random case erector that utilizes a side belt to move cases through a folding area & over the tape cartridge.

STB

Performance redefined with the STB battery powered tools for PP/PET straps in universal applications.

STM

Manual tool for sealless steel strapping. The lightweight ergonomic and durable mobile solution for universal applications.

STR 64/65/66

Pneumatic Tools for steel strapping with push type seals. Reliable high performance with adjustable tension.

Sus-Pak®

Sus-Pak® combines Sus-Rap and a specialty designed corrugated box for a unique packaging system.

Sus-Rap®

Sus-Rap® suspends in place cushions and blocks and protects from abrasion

Tenax®

Tenax polyester strapping (PET), designed for medium to heavy-duty palletizing and unitizing and can be applied by hand tools or strapping equipment.

Tier Sheets / Plastic Separator Sheets / Layer Sheets

Tier Sheets are clean, washable, and 100% solid polypropylene. They offer maximum load stability, reduced contamination, and greater product protection between layers of a variety of products.

TransMat Rubber Friction Mat

TransMat® Rubber Friction mat for load securement in rail, truck and intermodal. Prevents product movement and load-shift during transit.

Turbo Electric Inflator

Weighing only 10 lbs, the electric-powered Turbo Electric Inflator is ready for instant inflation of Shippers lightweight airbags -no pneumatics.

Turboflow Inflator

The Turbo Flow Inflation System is manufactured to fill Big Foot Vinyl dunnage bags faster than standard inflators while limiting overfill of airbags.

TX

The TX inflation system for Shippers Heavyweight Airbags provides quick filling of large bags while allowing for quick deflation and repositioning.

VersaJet Large Character Printer

Provides character print height from 3/8" to 2" and is capable of printing up to 39 characters per message line.

Void Fillers

G-Force single-drop and dual-drop lateral void fillers for center or sidewall voids to prevent product movement during transit.

Wood-Kor™ Bulkhead Panels

Wood-Kor Bulkhead Panels reinforced with lumber to be lightweight yet very strong. Available in multiple sizes.